Honeywell CC-TAON01 Non-Redundant 8CH Non-HART Analog Output IOTA Termination Base
- Product Code: CC-TAON01
- Availability: In Stock
Honeywell CC-TAON01 Non-Redundant 8CH Non-HART Analog Output IOTA Termination Base
Manufacturer: Honeywell Process Solutions
Model: CC-TAON01 (P/N:51405042-175)
Series: Experion PKS C300 Series C I/O System
Type: Simplex non-HART analog output IOTA termination assembly
Function: Field wiring terminal base matched with CC-PAOX01 analog output module; provides screw terminals for 4–20mA analog output signals to field actuators, I/P converters and ordinary valves; transmits isolated analog output signals, channel surge protection, mechanical interlock for hot-swap of upper AO module, separates field wiring and rack backplane circuits
1. Overview
CC-TAON01 is the dedicated simplex non-redundant IOTA terminal base for Honeywell CC-PAOX01 8-channel non-HART analog output module. It belongs to Series C I/O termination assembly, installed on C300 rack backplane, with CC-PAOX01 plugged vertically above. It has no HART communication circuit, only suitable for conventional non-smart 4–20mA actuators without HART positioners. Equipped with 8 groups of vibration-resistant screw terminals for field wiring, built-in per-channel surge suppression and galvanic isolation circuit to prevent field short-circuit and surge from damaging the AO module and rack backplane. Supports hot-swap maintenance of the matched CC-PAOX01 module without cabinet power cut, coated with G3 conformal coating, widely deployed in non-redundant control cabinets for power, petrochemical, water treatment and metallurgy general regulating valve control loops.
2. Technical Specifications
• Matching I/O Module: CC-PAOX01 (8-channel non-HART analog output)
• Redundancy Grade: Simplex single non-redundant base, no redundant signal circuit
• Output Signal Range: 4–20mA isolated analog output
• HART Circuit: Not equipped, cannot support HART smart valve positioners
• Terminal Block: 8-channel independent screw compression terminals, anti-vibration wiring structure
• Max Load Support: Matches 750Ω maximum load resistance per channel of CC-PAOX01
• Galvanic Isolation: 1500V RMS channel-to-backplane isolation
• Surge Protection: TVS transient voltage suppression components per output channel
• Mechanical Lock: Built-in module buckle interlock to ensure safe hot-swap
• Operating Temperature: -40°C ~ +70°C (G3 coated version)
• Storage Temperature: -40°C ~ +85°C
• Humidity: 5%~95% RH non-condensing environment
• Dimensions: 126 mm × 124 mm × 22 mm
• Weight: Approx. 0.38 kg
• Conformal Coating: Full board G3 coating for humid, dusty, corrosive cabinet environments
• Certifications: CE, UL, CSA, Class 1 Div 2 hazardous area certified
3. Key Features
• Exclusive Matching CC-PAOX01 Non-HART AO Module No HART modem circuit, low-cost wiring base for ordinary analog actuator control
• 8 Independent Screw Terminal Groups Clear channel marking, convenient on-site wiring and troubleshooting
• Per-Channel Isolation & Surge Protection Isolate field fault surge to protect upper analog output module and rack backplane
• Hot-Swap Safety Interlock Design Replace CC-PAOX01 online without powering off the entire control cabinet
• G3 Full Board Anti-Corrosion Coating Adapt to harsh industrial cabinet environments with moisture, dust and corrosive gas
• Economical Simplex Cabinet Solution Suitable for non-critical single control loops to reduce spare part inventory types
4. Applications
• Power plant non-redundant damper, ordinary regulating valve 4–20mA drive wiring cabinet
• Refinery & petrochemical plant I/P converter and conventional actuator control loop wiring
• Water treatment plant flow and pressure analog adjustment simplex control racks
• Metallurgy and pharmaceutical general process non-smart valve analog output signal termination
Honeywell © CC-TAON01 Non-Redundant 8CH Non-HART Analog Output IOTA Termination Base